PDA

Ïðîñìîòð ïîëíîé âåðñèè : Ìîìåíòû çàòÿæåê áîëòîâ è ãàåê JK



Roobicon
24.06.2014, 17:44
Áðàë îòñþäà (http://project-jk.com/jeep-jk-write-ups/jeep-jk-wrangler-torque-settings)

Íàñ èíòåðåñóåò ïåðâàÿ öèôðà îíà áîëåå ïðèâû÷íà äëÿ âîñïðèÿòèÿ.

BODY
DESCRIPTION N•m Ft. Lbs In. Lbs.
A/c expansion valve nut 23 17 —
Backlite hinge bolts 10 — 90
Body isolator mounting bolts 108 80 —
Body isolator to body nuts 54 40 —
Brake booster bracket nuts 18 13.5 —
Center OCS strain gauge stud nut 45 33 —
Door carrier plate screws 10 — 90
Door hinge pin nut 8.5 — 75
Door hinge to body bolts 28 21 —
Door hinge to hinge bolts 26 19 —
Door latch adjustment screw 3 — 26.5
Door latch mounting screws 8 — 71
Door latch striker bolts 26 19 —
Four door rear seat 40% inner seat back pivot nut 25 18.5 —
Four door rear seat center belt buckle bolt 61 45 —
Four door rear seat cushion pivot bolts 25 18.5 —
Four door rear seat front mounting fasteners 61 45 —
Four door rear seat headrest bolts 8 — 71
Four door rear seat inner latch floor bolts 25 18.5 —
Four door rear seat latch to back frame bolts 45 33 —
Four door rear seat outboard latch floor bolts 25 18.5 —
Four door rear seat rear mounting bolt 61 45 —
Four door rear seat rear mounting nuts 85 62.5 —
Four door rear seat seat cushion pivot bolt 25 18.5 —
Four door retractor screw 55 41 —
Four door seat cushion pivot bolt 25 18.5 —
Front door exterior handle nut 4.5 — 40
Front door glass run nut 10 — 90
Front door interior handle screw 8.5 — 75
Front seat back assembly bolts 47 34.5 —
Front seat belt anchor bolt 40 29.5 —
Front seat belt buckle bolt 50 37 —
Front seat belt turning loop screw 40 29.5 —
Front seat mounting bolts 61 45 —
Front seat riser nuts 28 21 —
Half door latch nut 4.5 — 40
Hard top front bolts 10.5 — 93
Hard top side bolts 18 13 —
Hood catch bracket nuts 7 — 62
Hood catch nuts 15 11 —
Hood hinge to body bolts 24 18 —
Hood hinge to hood bolts 26 19 —
Hood safety catch bolt 11 8 97
Instrument panel center support bracket fasteners 8 6 71
Instrument panel fence line nuts 12 9 —
Instrument panel side support bolts 11 8 —
Lower fender to sill bolts 12 9 —
Manual sifter bolt 33 24.5 —
OCS riser nuts 28 21 —
Outside rearview mirror bolts 13 10 —
Rear door exterior handle nut 4.5 — 40
Rear door glass run bolt 12 9 —
Rear door glass run nut 10 — 90
Rear door interior handle screw 8.5 — 75
Rear view mirror set screw 2 — 18
Seat side airbag nuts 7 — 62
Side step bracket bolts 24 18 —
Side step sill nuts 12 9 —
Soft top pivot knuckle bolts 14 10 —
Speaker pod screws 10 — 90
Sport bar cross bar bracket bolts 19 14 —
Sport bar front cross bar bracket bolts 19 14 —
Sport bar rear bolts 19 14 —
Sport bar rear cross bar bracket bolts 19 14 —
Sport bar side bar bolts 19 14 —
Sport bar side bar to windshield frame bolts 23 17 —
Sport bar to b-pillar bolts 19 14 —
Steering column opening reinforcement plate bolts 11 8 —
Tailgate exterior handle nuts 4.5 — 40
Tailgate hinge to body bolts 26 19 —
Tailgate hinge to tailgate bolts 20 15 —
Tailgate latch screws 8 — 71
Tailgate stabilizer insert and cup bolts 10 — 90
Tailgate striker bolts 28 21 —
Two door rear seat back frame to cushion bolts 50 37 —
Two door rear seat back latch bolts 45 33 —
Two door rear seat center belt buckle bolt 55 41 —
Two door rear seat cushion to back bolts 50 37 —
Two door rear seat front latch cushion frame bolts 45 33 —
Two door rear seat rear latch nuts 10 — 90
Upper fender fasteners 5 — 44
Windshield frame hinge to body bolts 20 15 —
Windshield frame reinforcement bracket bolts 20 15 —

BRAKE COMPONENTS
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Brake Booster Mounting Nuts 25 18 —
Master Cylinder Mounting Nuts 17 13 151
Booster Mounting Plate 18 — 159
Master Cylinder Brake Lines 19 14 168
Front Caliper Adapter Mounting Bolts 35 26 —
Rear Caliper Adapter Mounting Bolts 35 26 220
Front Caliper Brake Hose Banjo Bolt 31 23 —
Rear Caliper Brake Hose Banjo Bolt 31 23 —
Front Caliper adapter 163 120 —
Rear Caliper adapter 75 55 —
Parking Brake Lever Bracket Bolts 12 9 —


BRAKE ABS
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Hydraulic Control Unit Bracket to HCU Bolts 6.5 — 57
Hydraulic Control Unit Body Bracket Bolts 16-24 — 142-212
HCU to Body Bracket Bolts 9-13 — 80-115
Hydraulic Control Unit Brake Lines 15-18 — 130-160
Antilock Brake Module (ABM) Mounting Bolt 7-9 — 60-80
Front Wheel Speed Sensors Mounting Bolt 4-6 — 34-50
Rear Wheel Speed Sensors Mounting Bolt 12-14 — 106-124

CLUTCH
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Pressure Plate Bolts - 2.8L 31 23 -
Pressure Plate Bolts - 3.8L 50 37 -
Flywheel Bolts - 2.8L 95 70 -
Flywheel Bolts - 3.8L 81 60 -
Slave Cylinder Nuts 23 17 -
Dust Shield Bolts 50 37 -
Crossmember Frame Bolts 41 30 -

COOLING SYSTEM
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Bolt, Block Heater 2 - 17
Bolts, Condenser to Radiator
Electric Fan to Fan Shroud bolts 6 53
Bolts, Fan Blade Assembly to Viscous Drive - Diesel 23 - 210
Viscous Fan Drive - Diesel 50 37 -
Bolts, Fan Shroud to Radiator Mounting 8 - 70
Bolts, Radiator Upper Isolator to Crossmember 9 - 80
Bolts, Thermostat Housing- 28 - 250
Bolts, Water Pump
3.8L 12 - 105
2.8L 23 - 200

DIFFERENTIAL & DRIVELINE
PROPELLER SHAFT
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Front Shaft - Axle Flange Bolts 110 81 -
Front Shaft - Transfer Case Flange Bolts 20 15 -
Rear Shaft - Axle Flange Bolts 20 15 -
Rear Shaft - Transfer Case Flange Bolts 20 15 -

FRONT AXLE - 186FBI
DESCRIPTION SPECIFICATION
Axle Ratio 3.21, 4.10
Ring Gear Backlash 0.12 - 0.20 mm (0.005 - 0.008 in.)
Pinion Torque To Rotate - Original Bearings 1.13 - 2.26 N•m (10 - 20 in. lbs.)
Pinion Torque To Rotate - New Bearings 2 - 3.4 N•m (15 - 30 in. lbs.)
Differential Total Torque To Rotate: Pinion Torque To Rotate Plus 0.79 - 1.24 N•m (7 - 11 in. lbs.)

DESCRIPTION N•m Ft. Lbs. In. Lbs.
Fill Hole Plug 34 25 -
Differential Cover Bolts 41 30 -
Bearing Cap Bolts 61 45 -
Ring Gear Bolts 108 80 -
Pinion Bearing Nut Min - Max 217 - 542 160 - 400 -
Axle Nut 136 100 -
Hub Bearing Bolts 102 75 -

FRONT AXLE - 216FBI
DESCRIPTION SPECIFICATION
Axle Ratio 4.1
Ring Gear Backlash 0.12 - 0.20 mm (0.005 - 0.008 in.)
Pinion Torque To Rotate - Original Bearing 1 - 2 N•m (10 - 20 in. lbs.)
Pinion Torque To Rotate - New Bearing 2 - 4.5 N•m (20 - 40 in. lbs.)
Total Torque To Rotate: Pinion Torque To Rotate plus 0.79 - 1.24 N•m (7 - 11 in lbs)

DESCRIPTION N•m Ft. Lbs. In. Lbs.
Fill Plug 34 25 -
Differential Cover Bolts 41 30 -
Bearing Cap Bolts 108 80 -
Pinion Nut 217-271 160-200 -
Ring Gear Bolts 136 100 -
Axle Nut 136 100 -
Hub Bearing Bolts 102 75 -

REAR AXLE - 198RBI
DESCRIPTION SPECIFICATION
Axle Ratio 4.1
Ring Gear Backlash 0.12 - 0.20 mm (0.005 - 0.008 in.)
Pinion Torque To Rotate - Original Bearings 1 - 2 N•m (10 - 20 in. lbs.)
Pinion Torque To Rotate - New Bearings 2 - 4 N•m (20 - 35 in. lbs.)
Total Torque To Rotate: Pinion Torque To Rotate plus 0.79 - 1.24 N•m (7 - 11 in. lbs.)

DESCRIPTION N•m Ft. Lbs. In. Lbs.
Differential Cover Bolts 41 30 -
Bearing Cap Bolts 77 57 -
Ring Gear Bolts 136 100 -
Pinion Nut 271 - 475 200 - 350 -
Axle Retainer Nuts 61 45 -

REAR AXLE - 226RBI
DESCRIPTION SPECIFICATION
Axle Ratio 3.21, 4.10
Ring Gear Backlash 0.12 - 0.20 mm (0.005 - 0.008 in.)
Pinion Torque To Rotate - Original Bearings 1 - 2 N•m (10 - 20 in. lbs.)
Pinion Torque To Rotate - New Bearings 2 - 4.5 N•m (20 - 40 in. lbs.)
Total Torque To Rotate: Pinion Torque To Rotate plus 0.79 - 1.24 N•m (7 - 11 in. lbs.)

DESCRIPTION N•m Ft. Lbs. In. Lbs.
Fill Hole Plug 34 25 -
Differential Cover Bolts 41 30 -
Bearing Cap Bolts 108 80 -
Ring Gear Bolts 136 100 -
Pinion Nut 217 - 271 160 - 200 -
Axle Retainer Nuts 61 45 -

CLUTCH
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Pressure Plate Bolts - 2.8L 31 23 -
Pressure Plate Bolts - 3.8L 50 37 -
Flywheel Bolts - 2.8L 95 70 -
Flywheel Bolts - 3.8L 81 60 -
Slave Cylinder Nuts 23 17 -
Dust Shield Bolts 50 37 -
Crossmember Frame Bolts 41 30 -

COOLING SYSTEM
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Bolt, Block Heater 2 - 17
Bolts, Condenser to Radiator
Electric Fan to Fan Shroud bolts 6 53
Bolts, Fan Blade Assembly to Viscous Drive - Diesel 23 - 210
Viscous Fan Drive - Diesel 50 37 -
Bolts, Fan Shroud to Radiator Mounting 8 - 70
Bolts, Radiator Upper Isolator to Crossmember 9 - 80
Bolts, Thermostat Housing- 28 - 250
Bolts, Water Pump
3.8L 12 - 105
2.8L 23 - 200

- - - Updated - - -

Íàïèøèòå êîììåíò ïðîäîëæó òàáëèöó.

JouriM
24.06.2014, 22:09
êó

Roobicon
24.06.2014, 22:12
Ñïàñèáî!

ELECTRICAL-BATTERY SYSTEM
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Battery Terminal Clamp Pinch-Bolt Hex Nut 5 - 45
Battery Hold Down Bolt 7 - 62
Starter Solenoid B(+) Terminal Stud Nut 13 - 115
Battery Negative Cable Ground Eyelet Terminal To Engine Block Bolt 16.5 - 145
Generator Output Terminal Stud Nut 14 - 125
Totally Integrated Power Module B(+) Terminal Stud Nut 10 - 90
Battery Negative Cable Eyelet Terminal To The Inner Fender Bolt 12 9 -
Lower Battery Tray Bolts 10.5 - 93
Upper Battery Tray Bolts 10.5 - 93
Battery Tray Nut 10.5 - 93

ELECTRICAL-CHARGING SYSTEM
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Generator B+ Nut 12.4 9.2 110
Generator Mounting Bolts 3.8L 54.2 40 -
Generator Mounting Bolts/Nut 2.8L Diesel 54 40 -
Rear Generator Support Bracket Bolts (to engine) 2.8L Diesel 28 - 250
Starter Solenoid Battery Nut 3.8L 11.3 8.3 100
Generator Decoupler 109.8 81

ELECTRICAL-IGNITION CONTROL
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Camshaft Sensor Mounting Bolt — 3.8L 14.1 - 125
Camshaft Sensor Mounting Bolt — 2.8L Diesel 11 8 97
Ignition coil bolts — 3.8L 11.8 - 105
Spark Plugs — 3.8L 17.5 13 -
Glow Plugs — 2.8L Diesel 14 10 124
Knock Sensor — 3.8L 10 7 -

ELECTRICAL-INSTRUMENT CLUSTER
DESCRIPTION N-m Ft. Lbs. In. Lbs.
Instrument Cluster Mounting Screws 2 17
Instrument Panel Switch Pod Mounting Screws 2 17

ELECTRICAL-LAMPS/LIGHTING-EXTERIOR
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Center High Mounted Stop Lamp (CHMSL) Mounting Screws 2 - 20
Front Fog Lamp Mounting Screws 2 - 18
Left Multi-Function Switch Mounting Screw 1 - 10
License Plate Bracket Mounting Screws 1.5 - 15
Park Brake Switch Mounting Screw 2.5 - 24
Rear Fog Lamp Mounting Screws 3 - 27
Rear Lamp Unit Mounting Screws 1.5 - 15

ELECTRICAL-RESTRAINT SYSTEMS
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Clockspring Mounting Screw 3 - 27
Front Impact Sensor Mounting Screw 8 - 70
Side Impact Sensor Mounting Nut 8 - 70
Occupant Classification Module Mounting Screw 2 - 20
Occupant Restraint Controller Mounting Nut 9 - 80
Passenger Airbag Mounting Nut 6 - 55
Seat Airbag Mounting Nut 10 - 89
Front Seat Belt Buckle Lower Anchor Mounting Screw 45 33 -
Two-Door Second Row Seat Belt Buckle Anchor Plate Mounting Screw 55 41 -
Four-Door Second Row Right Seat Belt Buckle Anchor Plate Mounting Screw 61 45 -
Four-Door Second Row Center or Left Seat Belt Buckle Anchor Plate Mounting Nut 45 33 -
Front Seat Belt Retractor Mounting Screw 40 30 -
Front Seat Belt Turning Loop Mounting Screw 40 30 -
Front Seat Belt Lower Anchor Mounting Screw 40 30 -
Second Row Outboard Seat Belt Retractor Mounting Screw 40 30 -
Second Row Outboard Seat Belt Turning Loop Mounting Screw 40 30 -
Second Row Outboard Seat Belt Lower Anchor Mounting Nut 40 30 -
Second Row Center Seat Belt Retractor Mounting Screw 55 41 -
Second Row Center Seat Belt Lower Anchor Mounting Screw 61 45 -
Turning Loop Height Adjuster Mounting Screw 40 30 -
Seat Weight Sensor to Seat Adjuster Stud Nut 28 21 -
Seat Cushion Frame to Seat Weight Sensor Stud Nut 45 33 -

ELECTRICAL-SECURITY SYSTEM
DESCRIPTION N-m Ft. Lbs. In. Lbs.
Hood Ajar Switch Bracket Screw 8 - 71
Intrusion Module Mounting Screws 8 - 71
SKREEM Mounting Screw 2 - 20
Siren Mounting Screws 8 - 71

ELECTRICAL-WIPER/WASHER SYSTEM
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Right Multi-Function Switch Mounting Screw 1 - 10
Washer Reservoir Mounting Screw (Diesel) 9 - 79
Front Wiper Arm Mounting Nut 23 17 -
Rear Wiper Arm Mounting Nut 19.5 14 -
Front Wiper Module Mounting Screws 9.5 - 85
Rear Wiper Motor Mounting Bracket Nut 6 - 53
Rear Wiper Motor Mounting Bracket Special Fastener 4 - 35
Rear Wiper Motor Output Shaft Nut 4 - 35

3.8L ENGINE
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Camshaft Sprocket—Bolt 54 40 —
Camshaft Thrust Plate—Bolts 12 — 105
Forged Connecting Rod Cap-Nuts 54 +¼ turn 40 +¼ turn —
Cracked Connecting Rod Cap-Bolts
Crankshaft Main Bearing Cap-Bolts 41 +¼ turn 30 +¼ turn —
Crankshaft Main Bearing Cap Cross Bolts (3.8L) 61 45 —
Crankshaft Oil Seal Retainer Rear-Bolts 12 — 105
Crankshaft Damper-Bolt 54 40 —
Cylinder Block Drain Plugs 20 15 —
Cylinder Head-Bolts
Cylinder Head Cover-Bolts 12 — 105
Flex Plate to Crankshaft 88 65 —
Engine Mounting
Exhaust Manifold-Bolts 23 — 200
Intake Manifold - Lower-Bolts 23 — 200
Intake Manifold - Lower Gasket Retainer-Bolts 12 — 105
Intake Manifold Upper-Bolts 12 — 105
Lifter Yoke Retainer-Bolts 12 — 105
Oil Filter Attaching Fitting 54 40 —
Oil Cooler Attaching Fitting 27 20 —
Oil Filter 20 15 —
Oil Filter Adapter-Bolts 28 — 250
Oil Gallery Plug 27 20 —
Oil Pan—Bolts 12 — 105
Oil Pan Drain-Plug 27 20 —
Oil Pressure Switch 23 — 200
Oil Pump Cover Plate-Screws 12 — 105
Oil Pump Pick-up Tube-Bolt 28 — 250
Oil Dipstick Housing-Bolts 48 35 —
Rocker Arm Shaft-Bolts 23 — 200
Spark Plug 16 12 —
Thermostat Housing 12 — 105
Timing Chain Case Cover
—M8 Bolt 27 20 —
—M10 Bolt 54 40 —
Water Pump-Bolts 12 — 105
Water Pump Pulley-Bolts 28 — 250

2.8L DIESEL-ENGINE BLOCK
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Lower Oil Pan 15 12 133
Upper Oil Pan (m6 bolt) 15 12 133
Upper Oil Pan (m8 bolt) 32 23 283
Oil Pickup Tube 15 12 133
Oil Drain Plug 54 40 478
Balance Shaft 32 23 283
Main Bearing Caps
Connecting Rod Caps
Dipstick Tube (sump) 11 8 97
Dipstick Tube (block) 33 24 292
Oil Cooler Coolant Line 15 12 133
Transmission adapter bolts (hex head) 15 12 133
Transmission adapter bolts (Allen Head) 78 57 690
Oil Jet 11 8 97
Engine Mount Bolts 12 9 106
Oil Filter Cap 25 18.4 221
Oil Pressure Sensor 14 10 124
Air Temp/Pressure sensor 12 9 106


2.8L DIESEL-CYLINDER HEAD
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Cylinder Head Bolt
Cylinder Head Cover 11 8 97
Vacuum Tube 11 8 97
Fuel Rail 24 18 18
Fuel Injector Lines at the injector 28 20 247
Fuel injector lines at the fuel rail 20 15 177
High Pressure Fuel Feed Line at the Fuel Rail 20 15 177
High Pressure Fuel Feed Line at the High Pressure Pump 28 20 247
High Pressure Fuel Line Bracket bolt 15 11 133
Fuel injector 33 24 292
Glow Plugs 14 10 124
EGR Throttle Assembly 11 8 97
Exhaust Manifold 35 29 309
Camshaft Sprocket 64 47 566
Camshaft Cap 11 8 97
Front Camshaft Journal 11 8 97
Intake Manifold 25 19 221


2.8L DIESEL-FRONT ENGINE
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Outer Front Cover (upper) 11 8 97
Outer Front Cover (lower) 11 8 97
Inner Front Cover 11 8 97
Front Cover 15 12 133
Crankshaft Sprocket 100 + 75° 74+ 75° 885+ 75°
Crankshaft Pulley 32 23 283
Front Engine Lifting Bracket 45 33 398
Accessory Drive Idler Pulley 45 33 398
CMP sensor 11 8 97
Water Pump 32 23 283
Timing Belt Tensioner 20 15 177


2.8L DIESEL-REAR ENGINE
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Rear Cover 15 10 133
Rear Lifting Bracket 45 33 398
Crankshaft Sensor 11 8 97
CKP Cover Plate 15 11 133
Trans Adapter Plate (allen bolts) 79 58 699
Trans Adapter Plate (hex bolt) 45 33 398


2.8L DIESEL-ACCESSORY DRIVE
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Power Steering Pump Pulley 33 24 283
Power Steering Pump 33 24 283
Generator 33 24 283
Generator Bracket 45 33 398
A/C Compressor 32 23 283
A/C Compressor Bracket 45 33 33
Turbocharger 32 23 283
Turbocharger Oil Feed Line at the Turbocharger 24 18 212
Turbocharger Oil Feed Line at the Engine Block 32 23 283
Turbocharger Oil Return Line 15 11 133
Turbocharger Brace 32 23 283
Turbocharger Adapter (oil feed line to engine block connection) 54 40 478
EGR Valve 15 11 133
EGR Cooler 15 11 133
High Pressure Fuel Pump 24 18 212
High Pressure Fuel Pump Sprocket. 88 65 779
Oil Cooler Housing 32 23 283
Oil Cooler Feed Line 11 8 97

EXHAUST
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Bolts, Crossmember to Sill 42 31 -
Nuts, Crossmember to Transmission Mount 22 16 -
Nuts/Bolt, Exhaust Manifold to Engine
#6&7 31 23 -
#1,2,3,4,5,8,9,10&11 33 24 -
Nuts, Exhaust Pipe to Catalytic Converter Flange 27 - 19
Nuts, Catalytic Converter to Turbocharger 27 19 -
Bolt, DPF to Catalytic Converter 32 24 -
Bolts, DPF to Muffler 32 24 -
Clamp, Tailpipe to Rear Tailpipe Hanger 27 20 -
Oxygen Sensors 27 20 -
Heat Shields 45 33 -

FRAME AND BUMPERS
DESCRIPTION N•m Ft. Lbs In. Lbs.
Front bumper support bolts 90 66.5 —
Fuel tank skid plate to crossmember bolts 99 73 —
Rear bumper support bolts 25 18.5 —
Rear bumper support bracket to frame bolts 55 40.5 —
Trailer hitch/rear tow hook bolts 81 60 —
Transfer case skid plate crossmember bolts 65 48 —
Transfer case skid plate support bracket bolts 65 48 —
Transmission crossmember bolts 122 90 —
Transmission skid plate support crossmember bolts 65 48 —
Transmission skid plate to crossmember bolt 65 48 —

FUEL SYSTEM-3.8L GAS
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Accelerator Pedal Bracket Mounting 12 - 105
Crankshaft Position Sensor - 3.8L 28 21 -
Camshaft Position Sensor - 3.8L - - 106
Fuel Filler Hose Clamp at Tank 3 - 30
Fuel Filler Housing-to-Body Screws 2 - 17
Fuel Rail Mounting Bolts - 3.8L 22 17 200
Fuel Tank Mounting Straps 41 30 -
Throttle Body Mounting Bolts - 3.8L 7.5 5.5 65
Oxygen Sensors 41 30 -

åùå êóñî÷åê îñòàëñÿ

Ýääè
25.06.2014, 12:07
Èçó÷àåì àãëèöêèé. :)

Roobicon
25.06.2014, 14:34
åñòü è íà ðóññêîì â ãóãëîâñêîì âàðèàíòå, íî ýòî âîîáùå ïèïåö!
äîìîé ïðèåäó äîáüþ îñòàòîê òàáëèöû.

Ýääè
25.06.2014, 15:26
È Õåíåññè äîáåé. ;)

Roobicon
25.06.2014, 15:37
HEATING & AIR CONDITIONING
A/C SYSTEM
DESCRIPTION N•m Ft. Lbs. In. Lbs.
All Screws NOT Listed Below 1.2 – 10
A/C Compressor Bolts 28 21 –
A/C Compressor Clutch Field Coil Screws 5 – 44
A/C Compressor Shaft Bolt 20 – 177
A/C Compressor Field Coil Connector Bracket Screw 4.3 – 38
A/C Condenser to Radiator Bolts 5 – 45
A/C Heater Control Screws 2 – 17
Air Inlet Housing to Instrument Panel Support Bolts 4 – 35
Blend Door Lever Screw 0.6 – 5
Discharge Line to Condenser Nut 23 17 –
Discharge Line to Compressor Nut 23 17 –
Expansion Valve Bolts 11 – 97
HVAC Housing to Instrument Panel Support Bolts 4 – 35
Liquid Line to Condenser Nut 23 17 –
Mode Door Cam Screw 0.6 – 5
Receiver/Drier to Condenser Bolt 22 16 –
Suction Line to Compressor Nut 23 17 –
Suction and Liquid Lines to Expansion Valve Nut 8 – 70

STEERING COLUMN
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Steering Wheel Nut 54 40 —
Steering Column Mounting Nuts 17 — 150
Intermediate Shafts Coupler Pinch Bolts Upper & Lower 49 36 —
Upper Intermediate Shaft Mounting Nuts 13 — 115

POWER STEERING GEAR
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Pitman Shaft Overcenter Drag 0.45-0.80 + Worm Shaft Preload — 4-7 + Worm Shaft Preload
Power Steering Gear Adjustment Screw Locknut 65 48 —
Power Steering Gear to Frame Bolts 95 70 —
Power Steering Gear Pitman Shaft Nut 251 185 —
Power Steering Gear Pressure Line 36 27 —
Power Steering Gear Return Line 36 27 —


STEERING LINKAGE
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Pitman Arm Shaft 251 185 —
Drag Link Ball Stud to Pitman Arm 105 77 —
Drag Link Ball Stud to Knuckle 85 63 —
Drag Link Clamp 35 26 —
Tie Rod Ends Ball Studs 85 63 —
Tie Rod Ends Clamp 61 45 —
Steering Damper to Frame 68 50 —
Steering Damper Tie Rod nut 68 50 —
Track Bar Frame Bracket Nut 169 125 —
Track Bar Axle Bracket Bolt 169 125 —

STEERING PUMP
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Power Steering Pump to engine 26 19 —
Diesel Power Steering Pump Pulley 28 21 —
Power Steering Pump Pressure Line 31 23 —

SUSPENSION-FRONT
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Shock Absorber Upper Nut 27 20 —
Shock Absorber Lower Nut 76 56 —
Suspension Arm Lower Axle Bracket Nut 169 125 —
Suspension Arm Lower Frame Bracket Nut 169 125 —
Suspension Arm Upper Axle Bracket Nut/Bolt 102 75 —
Suspension Arm Upper Frame Bracket Bolt 102 75 —
Stabilizer Bar Retainer Bolts 61 45 —
Stabilizer Bar Link Upper Nut 102 75 —
Stabilizer Bar Link Lower Bolt 102 75 —
Track Bar Frame Bracket Nut 169 125 —
Track Bar Axle Bracket Bolt 169 125 —
Hub/Bearing Bolts 102 75 —
Hub/Bearing Axle Nut 136 100 —
Jounce Cup Bolt 42 31 —
Drag link to Knuckle (Right Side) 74 55 —
Drag link to Knuckle 74 55 —
Axle Shaft Nut 136 100 —
Wheel speed sensor 4-6 — 34-50

SUSPENSION-REAR
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Shock Absorber Upper Bolts 50 37 —
Shock Absorber Lower Nut 76 56 —
Suspension Arm Lower Axle Bracket Nut 169 125 —
Suspension Arm Lower Frame Bracket Bolt 169 125 —
Suspension Arm Upper Axle Bracket Bolt 169 125 —
Suspension Arm Upper Frame Bracket Bolt 169 125 —
Stabilizer Bar Retainer Bolts 61 45 —
Stabilizer Bar Link Nut/Bolt 102 75 —
Stabilizer Bar to Link Nut 90 66 —
Track Bar Frame Bracket Nut 169 125 —
Track Bar Axle Bracket Bolt 169 125 —

TRANSFER CASE - NV241 GENII
DESCRIPTION N-m Ft. Lbs. In. Lbs.
Plug, Detent 16-24 12-18 -
Plug, Drain/Fill 20-34 15-25 -
Bolt, Extension Housing 16-24 12-18 -
Bolt, Case Half 20-27 15-24 -
Screw, Oil Pump 12-16 8-12 -
Nut, Front Companion Flange 122-176 90-130 -
Nut, Range Lever 27-34 20-25 -
Sector Support 27-42 20-30 -
Nuts, Mounting 30-41 20-30 -
Position Sensor 20-34 16-25 -

TRANSFER CASE - NV241OR
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Plug, Detent 16-25 12-18 -
Plug, Drain/Fill 20-34 15-25 -
Bolt, Rear Extension 16-24 12-18 -
Bolt, Front Input Retainer 21 16 -
Bolt, Case Half 20-27 15-20 -
Nut, Front Yoke 122-176 90-130 -
Nut, Rear Companion Flange 258-312 190-230 -
Bolt, Shift Lever 20-34 15-25 -
Nuts, Mounting 30-41 20-30 -
Bolts, U-Joint 19 17 -
Support, Sector 27-42 20-30 -
Sensor, Transfer Case Position 20-34 16-25 -

MANUAL TRANSMISSION - NSG370
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Drain Plug 30 22 -
Fill Plug 30 22 -
Shift Tower Bolts 14 10 -
Shift Lever Bolt 4 - 33
Housing Bolts 28 20 -
Input Shaft Retainer Bolts 9 - 80
Bearing Retainer Bolts 10 - 88
Shift Rail Support Bolts 8 - 71
Idler Gear Shaft Bolt 20 15 -
Countershaft Bolt 100 74 -
Transmission - Top Four Bolts 40 30 -
Transmission - Side Two Bolts 68 50 -
Transmission - Bottom Four Bolts 54 40 -
Crossmember Bolts 47 35 -
Transmission Mount Bolts 47 35 -

AUTOMATIC TRANSMISSION - 42RLE
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Bolt, Converter-to-Driveplate 88 65 -
Bolt, Fluid Filter-to-Valve Body 5 - 45
Bolt, L/R Clutch Retainer-to-Case 5 - 45
Bolt, Adapter/Extension Housing 54 40 -
Bolt, Manual Valve Lever-to-Manual Valve 5 - 45
Bolt, Oil Pan-to-Case 20 14.5 -
Bolt, Oil Pump-to-Case 30 - 265
Bolt, Park Sprag Retainer 4.5 - 40
Bolt, Reaction Shaft Support Halves 28 - 250
Bolt, Solenoid/Pressure Switch Assy-to-Valve Body 5.5 - 50
Bolt, Torque Converter Housing to Engine Block 129 95
Bolt, Valve Body-to-Case 12 - 105
Bolt, Valve Body-to-Transfer Plate 5 - 45
Fitting, Cooler Line 47.5 35 -
Nut, Output Shaft 271 200 -
Plug, Pressure Tap 5 - 45
Bolt, Input Speed-to-Case Sensor 9 - 80
Bolt, Output Speed-to-Case Sensor 9 - 80

AUTOMATIC TRANSMISSION - 545RFE (DIESEL)
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Fitting, cooler line at trans 17.5 - 155
Bolt, torque converter housing to engine upper four 41 30
Bolt, torque converter housing to engine lower four 54 40
Bolts, transmission collar 68 50
Bolt, torque converter to driveplate 31 23 270
Bolt/nut, crossmember 68 50 -
Bolt, driveplate to crankshaft 75 55 -
Bolts, clevis bracket / rear support 47 35
Bolt , converter housing 68 50
Bolt, oil pan 12 - 105
Screw, primary fluid filter 4.5 - 40
Nuts, transfer case 35 26
Oil Filter, Cooler Return 9.5 84
Bolt, oil pump 28 - 250
Bolt, oil pump body to cover 4.5 - 40
Screw, plate to oil pump body 4.5 - 40
Bolt, valve body to case 12 - 105
Plug, pressure test port 5 - 45
Bolt, reaction shaft support 12 - 105
Screw, valve body to transfer plate 5.5 - 50
Screw, solenoid module to transfer plate 6 - 50
Screw, accumulator cover 7 - 60
Screw, detent spring 4.5 - 40
Bolt, input speed sensor 12 - 105
Bolt, output speed sensor 12 - 105
Bolt, line pressure sensor 12 - 105
Bolt, extension housing 54 40 -
Screw, manual valve cam retaining 4.5 - 40
Screw, manual selector shaft retaining 28 - 250
Cross-bolt, manual selector shaft 16 - 140

WHEELS
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Lug Nut 1/2 X 20 with 60° Cone 115-170 85-125 —
Spare Wheel Lug Nut 54–108 40–80 —

TIRE PRESSURE MONITOR
DESCRIPTION N•m Ft. Lbs. In. Lbs.
Tire Pressure Sensor/Transmitter Mounting Nut 8 — 71